Auseal EC25 Sandstone (Yellow) Sealer 10L for Concrete Sleepers
$108.00 +GST
1000 in stock
- Your Quote Request is obligation-free — no payment or credit card information is needed during checkout at this point in time.
EC25 is a general purpose concrete sealant designed specifically for sealing and protecting dry concrete sleepers with a medium gloss finish. EC25 is made entirely of acrylic copolymer.
Introducing the FREE and Exclusive Retaining Wall Calculator from Sunset Sleepers!
Take the guesswork out of your project—instantly find out how many concrete sleepers and steel posts you’ll need for your retaining wall.
For engineers and professionals, unlock advanced specs too, including Scoria backfill requirements, concrete volumes for posts, and more.
Plan smarter. Build with confidence. Try it today!
Statewide delivery across Melbourne and regional Victoria. Delivery costs depend on depot, address, order size, and vehicle needs.
Small taper (5-10mm) at the ends from face to back of sleeper
Please note that all of our concrete sleepers have a small taper (5-10mm) at the ends from face to back of sleeper to aid in the demoulding of the sleeper during the production process. For more information, please see our Engineering Guide or reach out to our support team for any questions.
Need a hand with your retaining wall project?
Our experienced team is here to help you source the right materials and guide you in the right direction.
Features
Excellent durability – good UV stability
Excellent Water Resistance
Reduces Efflorescence
Suitability for both Interior and Exterior application.
Low tyre marking characteristics
Suitability for concrete, brick, terracotta and slate
Coverage
5 – 7 square metres per litre, depending on surface profile and porosity. The first coat should be diluted up to 20% with solvent.
Surface Cleaning
Dust, dirt, oil, grease, and other contaminants must be removed from all surfaces to be sealed or coated.
Degrease all surfaces and rinse thoroughly with clean water, scrubbing to remove all contaminants while washing down the area. Repeat this procedure until all contaminant residues have been removed.
If the surface is not profiled, acid etch it with hydrochloric acid diluted 10 parts water to 1 part acid. Broom on the surface and leave to react for 10 minutes. Allow to dry before hosing off with copious amounts of fresh water.
Allow the surface to completely dry before applying the sealer.
Application
To ensure uniformity, thoroughly stir before and during application, making sure that any suspended pigment (if coloured) is completely re-incorporated.
To aid penetration and adhesion, the first coat should be thinned with 10-20% Xylene.
Using a broom, roller, or spray gun, apply the coating evenly. Blisters can form if the product is applied unevenly.
Allow the recommended drying time before applying a full second coat without dilution.
Additional information
| Liters | 10 Litres |
|---|---|
| Colour | Sandstone (Yellow) |
