Auseal EC25 – Clear Sealer (Colourless) 20L for Concrete Sleepers

Features
Excellent durability – good UV stability
Excellent Water Resistance
Reduces Efflorescence
Suitability for both Interior and Exterior application.
Low tyre marking characteristics
Suitability for concrete, brick, terracotta, exposed aggregate and slate.

Suitable as a sealer for application by broom, roller or airless spray for application to concrete sleepers, pebble and slate floors.

Coverage

5 – 7 Square metres per litre depending on profile and porosity of surface. First coat should be diluted with up to 20% solvent.

Surface Preparation

All surfaces to be sealed or coated must be free from dust, dirt, oil, grease and other contaminants.

Clean all surfaces with degreasant and flush with copious quantities of clean water, scrubbing to remove all contaminants while washing down the area. Repeat this application until all residues of contaminant are removed.

Acid etch bare concrete if surface is not profiled, using hydrochloric acid diluted with 10 parts water to 1 part acid. Broom on to surface and leave to react for approximately 10 minutes. Do not allow to dry out, hosing off with copious quantities of fresh water.

Allow surface to thoroughly dry prior to sealer application.

Application

Stir thoroughly before and during application to ensure uniformity, making sure that any suspended pigment (if coloured) is completely re-incorporated.

The First coat must be thinned with 10-20% Xylene to assist penetration and adhesion.

Apply coating evenly with broom, roller or spray gun. Uneven application may result in blistering.

Allow recommended drying time and apply evenly one full second coat without dilution.

Packaging and Safety

AUSEAL EC25 is available in 4, 10, 20 and 200 litre drums.

Refer to the Material Safety Data Sheet before handling or use.

Other Safety Data Sheets

Same_Day_Sealer-SDS
POWERSEAL-GHS_SDS
POWERSEAL_PRIMER-GHS_SDS
HYDROCHLORIC_ACID_33_-GHS_SDS
HIGH_GLOSS-GHS_SDS
EXPOZE_HIGH_TECH_CONCRETE_SURFACE_RETARDER-GHS_SDS
AUS-STRIP_ACRYLIC_SEALER_STRIPPER-GHS_SDS
AUSEAL-CURITE_LIQUID_POLY-GHS_SDS
AUSEAL-CURITE_EXPOZE_GEL-GHS_SDS
XYLENE-GHS_SDS
Slip_Reducer-GHS_SDS

Precautions
AUSEAL EC25 IS A COMBUSTIBLE LIQUID.
Provide adequate ventilation during application and drying.
Store away from naked flames and sparks.
Ensure you are familiar with MSDS prior to usage.